How much is does it cost?
You can purchase The Concrete Protector Penetrating Sealer from us at $77.05 per bottle plus shipping and apply it yourself for around .19 a sq ft. The quart sized bottles of penetrating sealer are concentrated and make 2.5 gallons of ready-to-use sealer when mixed with water.
How Much Coverage Do I Get?
The coverage rate is 425-500 sq ft per 2.5 gallons of mixed sealer.
I just poured fresh concrete. How long do I have to wait until I can put on the sealer?
Some Contractors have successfully applied it immediately, but for best results we recommend waiting 30 days.
How will the sealer be delivered?
We ship products through UPS.
What happens if I receive the sealer and it’s damaged?
Contact our shipping department immediately at and we will help with the return process.
What’s the difference between TCP Concrete Sealer and a normal acrylic Concrete sealer?
Unlike film-forming acrylic sealers, the penetrating sealer that we use is a reactive product that chemically alters the surface of the concrete (by glassifying it) creating a water resistant membrane protecting the surface from water penetration that causes damage. At the same time, the appearance (color) and texture of the surface is not changed in any way like other sealers do.
How effectively do I have to power wash concrete?
We recommend using a professional pressure washer (we sell them or you can rent them), and also using a degreaser (Dawn Dish Soap is one of the best).
How long do I have to wait until I can drive on the concrete after I seal it?
For best results we recommend 24 hours.
What temperatures can I apply the sealer?
Good temperature range at time of application – between 50 – 95 degrees Fahrenheit: 50 degrees Fahrenheit on the low end (with no freezing that night) and no warmer than 95 degrees Fahrenheit on the high end.
How long does the Sealer last?
The first 3 years you’ll have excellent protection, good protection in years 4-5 and after that you should consider resealing it. These are just general guidelines – many things will factor into how long it’s expected to protect the concrete.
Can I apply the sealer in my basement?
Yes it will help with dampness, and moisture issues. For complete and permanent waterproofing, and repair we recommend using Sani-Tred
What are the mix ratios?
Concrete Protector sealer is mixed at a 9:1 ratio. So 2 1/4 Gallons of water to 1 Quart bottle of sealer.
What’s the best way to spray the Sealer?
We recommend a hand pump sprayer, or battery powered sprayer both available on our store.